Skip to content
Dad & SawdustMADE BY YOU.

BB—03 · DIGITAL BUILD PLANS

Build a little book bin.

A low wooden book bin for a reading corner. These original digital plans describe a fixed bin made from nine straight-cut pieces and twenty screws.

A timber supplier can cut the straight pieces. You measure, drill, sand, finish and assemble with the illustrated guide.

Digital product · wood, materials and tools not included

3D rendering of the Little Book Bin with low sides and books
3D rendering of the design BB—03
EU outside size480 × 300 × 192 mm
US outside size19 × 12 × 7½ in
Wooden pieces9
Installed screws20

01 / THE DESIGN

Wooden book bin plans.

A plywood base and four walls joined through four solid corner posts. No lid or moving parts.

The end walls fit between front and back. Screws enter the solid posts through plywood faces, never plywood edges.

02 / FROM WOOD TO STORAGE

Five clear phases.

The build route is for adults who can measure, clamp and drill safely. Having the pieces pre-cut is the easiest way to start.

  1. 01

    Check and label nine pre-cut pieces.

  2. 02

    Mark the drill points, practise on offcuts and dry-fit the bin.

  3. 03

    Drill clearance and pilot holes, ease the edges and keep glue faces bare.

  4. 04

    Join front and back walls to the corner posts; add the end walls.

  5. 05

    Fit the base, allow glue and finish to cure, and inspect all twenty screws.

03 / LOOK INSIDE THE GUIDE

A plan you can follow.

The illustrated guide has 34 pages. Choose Dutch EU, English EU or English US. Each edition has its own dimensions, PDF manual, cut list and shopping list.

English EU · A401 / 02
Sample page 1 from the Little Book Bin digital plans

ONE DIGITAL EDITION

Choose the measurements for your workshop.

millimetres · EU materials

€14.95one payment · one selected edition

Your download contains the illustrated PDF, matching cut list, shopping list and START file. Wood, materials and tools are not included.

BEFORE BUILDING

Make room for checks.

This is an unbuilt digital design. Physical stability, load capacity, durability and child use have not yet been tested. Build away from children. After assembly, check every joint, screw tip, splinter and stability. Let glue and finish cure fully. It is not a seat, step or climbing object.

Store books on a level floor, outside walkways.

04 / GOOD TO KNOW

Before you begin.

Can I have the wood cut for me?

Yes. The cut list is meant to take to a timber supplier. Check the actual sheet thickness and whether the supplier cuts small pieces. Drilling, sanding, finishing and assembly remain part of the project.

Which edition should I choose?

NL-EU and EN-EU use millimetres and EU materials; EN-US uses inches and US materials. Follow one complete edition without mixing dimensions.

What do I need beyond the download?

You provide plywood, solid timber, screws, wood glue and finish. For the pre-cut route you also need measuring tools, clamps, a drill, suitable bits and a depth stop. The guide gives the full list.

Is this a tested children’s product?

No. These are digital building plans for adults. A physical build and use test has not yet been documented. Inspect your own build carefully; the plan makes no certified age or load claim.

THE COLLECTION

Four projects. One world of play.

Choose a clear digital plan for what you want to make.